My 19 build begins in earnest - H811b arrives....

[BillWojo]

I've been looking at building a set of Model 19 crossovers for my HeathKit AS 101's. It has a driver load very much like the Model 19. So far, pricing everything out the parts are coming to roughly 215.00 from Parts Express.
When I get some cash together I'll start a separate post with my parts list so that you folks can ok it. The inductors are where it gets confusing. I'm looking at Jantzen inductors, I think the 18 AWG ones will work but I'm unsure. Also there is no direct match for the 0.77mH inductor but they list a 0.75 mH inductor. I would think that it would be close enough.

BillWojo

[gdmoore28]

I've been looking at building a set of Model 19 crossovers for my HeathKit AS 101's. It has a driver load very much like the Model 19. So far, pricing everything out the parts are coming to roughly 215.00 from Parts Express.
When I get some cash together I'll start a separate post with my parts list so that you folks can ok it. The inductors are where it gets confusing. I'm looking at Jantzen inductors, I think the 18 AWG ones will work but I'm unsure. Also there is no direct match for the 0.77mH inductor but they list a 0.75 mH inductor. I would think that it would be close enough.

BillWojo

Bill, I would very much appreciate it if you would indeed post your final Parts Express parts list once you have it all nailed down. Like Coelecanth, my build has been in the analysis/paralysis phase for quite some time now, but, like you, I've pretty much come to the conclusion that the original Model 19 crossover design may be the way to go with a Model 19-based build. As you noted, it's a very versatile crossover made specifically for the Altec drivers. I've driven myself half crazy trying to decide which crossover design to use for my 416/802/511B project, and I haven't ruled out using the original model 19 design. Having that parts list in hand would be great time-saver for many of us. Thanks in advance.
GeeDeeEmm